Expert Advice & News

If you’re looking for a new Gas Safe boiler installation in Crawley, then I can help with a very competitive price structure that’s transparent and fair, I'm always happy to quote for any boiler brand or model. 

If you have purchased a Nest or Hive Smart WiFi Thermostat and would like to have it installed, then I can help. If you live in or near Horsham, Southwater, Broadbridge Heath, Slinfold, Billingshurst, Steyning, Storrington, Ashington, Rudgwick, Cowfold, Pulborough, Warnham, Henfield, Bramber, Upper Beeding, Partridge Green, Rusper or Faygate.

We have had a couple of cold starts in the past week which has seen the Office phone ringing like mad from 7 am all day, and the truth is that all the breakdowns have been a result of lack of maintenance which could have been avoided, some of these were small system faults too, like the odd rad not working or getting hot enough, these could of all ben dealt with on a yearly service, if you time your annual service right then you can get these things sorted o...

We can supply and fit a new Intergas Eco Combi RF 36 Boiler with no VAT to pay, The quote will include all parts, labour and materials.Our installations come with a 10-year warranty, nest smart Wi-Fi room thermostat, Fernox TF1 Omega Filter, Fernox Chemical Cleaner & Inhibitor, Fernox 15mm Electrolytic scale reducer, filling loop with gauge, 22mm Automatic Bypass Valve & 15mm shock arrestor.plus pipework insulation if required.Best rates in Horsham on a like for like boiler swap with ...

In my opinion it is of the utmost importance that you have your unvented cylinder serviced every year, the cylinder has a number of safety devices that require to be checked for functionality and safety, you need to ensure that the inline strain filter is clean and clear, as this can cause a restriction in flow/performance and also cause unwanted noise from the combination valve, it is important to check the correct operation of the thermal cut off device and that it has been wired correctly.

Is your Ideal Logic Boiler starting to need a little TLC? I have started to come across more and more Ideal Logics over the past year that have the same couple of faults, Alarmingly a lot of  my finds are of one particular fault, which is a hairline crack in the exact same place on a plastic sump on the heat exchanger within the boiler, this has to be a manufacturing fault with the moulds or something, anyway this drips water (which is actually condensate water from the products of combustion)